Information support for the procedure of measuring the flow rate of water in open channels by a water current meter with Arduino Micro board

Authors

  • Dmytro Tagirovych Reut National University of Water and Environmental Engineering
  • Serhii Klimov National University of Water and Environmental Engineering https://orcid.org/0000-0002-5993-847X
  • Anastasiya Klimova National University of Water and Environmental Engineering

DOI:

https://doi.org/10.31713/MCIT.2020.22

Keywords:

water current meter, flow velocity measurement, Arduino programming

Abstract

The modernization of a typical water current meter is proposed to facilitate hydrological observations on natural and artificial open watercourses. An Arduino Pro Micro microcontroller board was used to read the speed of the current meter and primary data processing, programs were developed: for the lower level - a microcontroller located on the board, and for the upper level - a smartphone to determine the water speed. The programs take into account the peculiarities of converting data on the flow rate of water with a current meter and allow you to enter additional indicators that reduce the uncertainty of the results.

Downloads

Published

2020-10-23

How to Cite

Reut, D. T., Klimov, S., & Klimova, A. (2020). Information support for the procedure of measuring the flow rate of water in open channels by a water current meter with Arduino Micro board. Modeling, Control and Information Technologies: Proceedings of International Scientific and Practical Conference, (4), 88–91. https://doi.org/10.31713/MCIT.2020.22

Issue

No. 4 (2020): Modeling, control and information technologies: Proceedings of IV International scientific and practical conference

Section

Problems of automated control, optimization and parameters identification