Research of simulation model of electrocoagulation process

Автор(и)

  • Andrii Safonyk National University of Water and Environmental Engineering http://orcid.org/0000-0002-5020-9051
  • Anna Burduk Wroclaw University of Science and Technology
  • Ivan Targoniy National University of Water and Environmental Engineering

DOI:

https://doi.org/10.31713/MCIT.2019.67

Ключові слова:

electrocoagulation, simulation model, automation, sewage, regulation

Анотація

A mathematical model of the electrocoagulation process has been constructed, taking into account the geometric dimensions of the reactor, the volumetric flow rate of the liquid and the applied current. A simulation model has been developed that describes the processes occurring in a coagulator, on the basis of which was studied the influence of current, changes in the concentration of inlet contamination on the concentration of the target component at the outlet of the reactor.

##submission.downloads##

Опубліковано

2019-11-05

Як цитувати

Safonyk, A., Burduk, A., & Targoniy, I. (2019). Research of simulation model of electrocoagulation process. Моделювання, керування та інформаційні технології, (3), 117–118. https://doi.org/10.31713/MCIT.2019.67

Номер

2019: Modeling, control and information technologies: Proceedings of III International scientific and practical conference

Розділ

Problems of automated control, optimization and parameters identification

Статті цього автора (авторів), які найбільше читають